Track Pad Guide

Select your machine from the drop down list below:

learn more

Track Pads

Long-lasting, labor-saving track pads put money in your pocket.

learn more

Rubber Tracks

Fast track replacement rubber tracks maximize uptime.

learn more

Undercarriage Parts

Get the right part every time with BLS undercarriage experts.

learn more

Bolt-On and Clip-On Rubber Artliner-BLS Track Pads

Easy-On and Easy-Off Track Pads for Temporary Use On Varied Surfaces

Bolt-On and Clip-on Rubber Artliner-BLS Track Pads provide an easy transition from working in dirt with steel tracks to working on delicate surfaces where protection or traction is needed. They are made from durable, reinforced, cut-resistant rubber for temporary or short-term use on varied surfaces. Easily revert to steel track when protection is not required. These track pads work with triple grouser steel shoes.

The rubber track pads come in two convenient mounting styles: bolt-on or clip-on. Both are easy to install and remove. These actions can be done quickly on-site, with no special knowledge. Artliner-BLS Track Pads are available for more than 1,000 machines and 40 manufacturers. BLS can also customize an Artliner-BLS Track Pad for your specific needs.

- Provides traction and protection against steel track damage on any surface your machine needs to work on
- Eliminates the need for placing protective mats or boards under the steel track
- No need to bring in a large truck to transport the machine just a few yards
- Saves time and reduces labor costs
- Quick and easy on-site installation and removal of pads
- No specialized knowledge of drive chains is required
- Increases machine versatility. Easily reverts to steel track for work in dirt or other areas in which protection is not required
- Moves machines with increased stability and traction over unstable surfaces
- Fast shipment for many popular machines

- Unlike most competing products, Artliner-BLS Track Pads fit between the grousers bars of the steel shoe, preventing the pads from slipping
- Pads are attached to the steel shoe, not to the machine
- Available in two types of mounting configurations: Clip-On Track Pad or Bolt-On Track Pad
- The Clip-On Track Pad attaches directly to the steel grouser shoe either by a bolt-on bracket at each end, or by a slip-over yoke at one end and a bolt-on bracket at the other
- The Bolt-On Track Pad has threaded studs bolted through pre-drilled holes in the grouser plate
- Available for many popular machines using 12-inch to 32-inch (300mm to 801mm) wide track shoes
- Special non-marking white rubber compound is available upon request for any application

- Excavators
- Trenchers
- Directional drills
- Concrete pavers
- Crawlers
- Other steel tracked vehicles

TUFPADS Blues Track Pads
BLS Polyurethane Bonded TUFPADS
High Quality Rubber (HQRPADS)
Artliner-BLS Bolt-On and Clip-On Rubber
Stabilizer Pads

Questions? Click here to contact your BLS sales representative for answers.